Pages

Wednesday, December 7, 2011

TEST Homemade fishing light attractant


95% of the Moon so night was very bright, It took about 2 hours and after whole night work battery still has charge.

Wednesday, November 30, 2011

Homemade Fishing Light Attractor and Gaff(pt II)

2. Fishing Gaff (I have a small boat so I made 1m gaff)
For the gaff you need 20" of stainless wire 0.02", 1m of pvc pipe 1", 2" of pvc pipe 1.25", a pvc cap 1" and a pvc cap 1.25", 10" of bamboo about 1"
Firstly make a hole in bamboo and 1" pvc cap, I used the stainless wire, I heated it and burned a hole.(Sorry about following photos, I assembled before took photos)
 Cut the bamboo from hole till opposite side
 Sharp one side of the wire and bend it into a hook
 Put the hook into the bamboo and put it in the 1" pvc pipe
It must go in with pressure, after put on 1" pvc cap
 On back side I used 1.25" pvc pipe
 And 1.25" pvc cap, now it never slip off from my hand
 Now it looks pretty well, but need to add some rope on the handle

Now I wrap some rope
 on the handle and on the point

 and that it

this gaff never drown.


Homemade Fishing Light Attractor and Gaff(pt I)

On the eve of BIG BUY I prepare couple of useful things:
1. Fishing Light Attractor
for this Light I used: 1x36W Fluorescent lamps (Green color), 1.3m transparent pipe 1.25", 3m    transparent hose 0.25", 3m rope(green color :)), 2 pcs pvc cap for pvc tube 1.25", 6m 2x1sq.mm cable, 2m 2x0.25sq.mm, switcher,8 pcs connectors,Ice cream box, 2 pcs Coke plastic cap, clue for pvc pipes.
It'll cost to you about 15USD. Now we can connect all the parts into one, so let get start.
Firstly dismount the lamp
Move 2  electrical into ice cream box
connect cable 0.25" to the lamp through the Coke cap, and put it in transparent pipe

in one pvc cap make a hole, this step has many ways, I used a soldering-iron and a coin
put your 6m 2x1sq.mm cable and 3m rope into 3m transparent hose 0.25" and connect the hose through pvc cap with 1.25" transparent pipe and opposite side with ice cream box. All connections make with Pipe glue



 To liven up the Light Attractor I use Battery 100Ah and Inverter 12DC to 220V 500W,
I hope it'll be helpfully