Homemade Fishing Light Attractor and Gaff(pt II)

2. Fishing Gaff (I have a small boat so I made 1m gaff)
For the gaff you need 20" of stainless wire 0.02", 1m of pvc pipe 1", 2" of pvc pipe 1.25", a pvc cap 1" and a pvc cap 1.25", 10" of bamboo about 1"
Firstly make a hole in bamboo and 1" pvc cap, I used the stainless wire, I heated it and burned a hole.(Sorry about following photos, I assembled before took photos)

 Cut the bamboo from hole till opposite side

 Sharp one side of the wire and bend it into a hook

 Put the hook into the bamboo and put it in the 1" pvc pipe

It must go in with pressure, after put on 1" pvc cap

 On back side I used 1.25" pvc pipe

 And 1.25" pvc cap, now it never slip off from my hand

 Now it looks pretty well, but need to add some rope on the handle

Now I wrap some rope

 on the handle and on the point

 and that it

this gaff never drown.