95% of the Moon so night was very bright, It took about 2 hours and after whole night work battery still has charge.
Wednesday, December 7, 2011
TEST Homemade fishing light attractant
95% of the Moon so night was very bright, It took about 2 hours and after whole night work battery still has charge.
Wednesday, November 30, 2011
Homemade Fishing Light Attractor and Gaff(pt II)
2. Fishing Gaff (I have a small boat so I made 1m gaff)
For the gaff you need 20" of stainless wire 0.02", 1m of pvc pipe 1", 2" of pvc pipe 1.25", a pvc cap 1" and a pvc cap 1.25", 10" of bamboo about 1"
Firstly make a hole in bamboo and 1" pvc cap, I used the stainless wire, I heated it and burned a hole.(Sorry about following photos, I assembled before took photos)
Cut the bamboo from hole till opposite side
Sharp one side of the wire and bend it into a hook
Put the hook into the bamboo and put it in the 1" pvc pipe
It must go in with pressure, after put on 1" pvc cap
On back side I used 1.25" pvc pipe
And 1.25" pvc cap, now it never slip off from my hand
Now it looks pretty well, but need to add some rope on the handle
Now I wrap some rope
on the handle and on the point
and that it
this gaff never drown.
For the gaff you need 20" of stainless wire 0.02", 1m of pvc pipe 1", 2" of pvc pipe 1.25", a pvc cap 1" and a pvc cap 1.25", 10" of bamboo about 1"
Firstly make a hole in bamboo and 1" pvc cap, I used the stainless wire, I heated it and burned a hole.(Sorry about following photos, I assembled before took photos)
Cut the bamboo from hole till opposite side
Sharp one side of the wire and bend it into a hook
Put the hook into the bamboo and put it in the 1" pvc pipe
It must go in with pressure, after put on 1" pvc cap
On back side I used 1.25" pvc pipe
And 1.25" pvc cap, now it never slip off from my hand
Now it looks pretty well, but need to add some rope on the handle
on the handle and on the point
and that it
this gaff never drown.
Homemade Fishing Light Attractor and Gaff(pt I)
On the eve of BIG BUY I prepare couple of useful things:
1. Fishing Light Attractor
for this Light I used: 1x36W Fluorescent lamps (Green color), 1.3m transparent pipe 1.25", 3m transparent hose 0.25", 3m rope(green color :)), 2 pcs pvc cap for pvc tube 1.25", 6m 2x1sq.mm cable, 2m 2x0.25sq.mm, switcher,8 pcs connectors,Ice cream box, 2 pcs Coke plastic cap, clue for pvc pipes.
It'll cost to you about 15USD. Now we can connect all the parts into one, so let get start.
Firstly dismount the lamp
Move 2 electrical into ice cream box
in one pvc cap make a hole, this step has many ways, I used a soldering-iron and a coin
To liven up the Light Attractor I use Battery 100Ah and Inverter 12DC to 220V 500W,
I hope it'll be helpfully
1. Fishing Light Attractor
for this Light I used: 1x36W Fluorescent lamps (Green color), 1.3m transparent pipe 1.25", 3m transparent hose 0.25", 3m rope(green color :)), 2 pcs pvc cap for pvc tube 1.25", 6m 2x1sq.mm cable, 2m 2x0.25sq.mm, switcher,8 pcs connectors,Ice cream box, 2 pcs Coke plastic cap, clue for pvc pipes.
It'll cost to you about 15USD. Now we can connect all the parts into one, so let get start.
Firstly dismount the lamp
Move 2 electrical into ice cream box
connect cable 0.25" to the lamp through the Coke cap, and put it in transparent pipe
put your 6m 2x1sq.mm cable and 3m rope into 3m transparent hose 0.25" and connect the hose through pvc cap with 1.25" transparent pipe and opposite side with ice cream box. All connections make with Pipe glue
I hope it'll be helpfully
Tuesday, November 8, 2011
Takle Shops
I want to order some takle from my best eShops:
Cabela's and Plat
Fishing Line
Swivel
Jig Hooks
Jig: 1, 2
Assist: 1, 2
Assist Line
Solid rings
Split Rings
Leader
It's for Deep jigging, and I want to find rod and reel for it
Cabela's and Plat
Fishing Line
Swivel
Jig Hooks
Jig: 1, 2
Assist: 1, 2
Assist Line
Solid rings
Split Rings
Leader
It's for Deep jigging, and I want to find rod and reel for it
Wednesday, November 2, 2011
Wednesday, October 26, 2011
Minnow circuit
I little bit used PS and did circuit of Minnow for my Home made bait.
It is 3 size 3", 4" and 5"
after This circuit I'll do simples from clay, than I'll do the molds, and in the end I'll inject these molds with BIO-Plastic + some attractant.
It'll be "edible wobbler".
Saturday, October 22, 2011
Friday, October 21, 2011
Amazing!!!
Few days ago I broke a tulip on my fishing rod. I'm starting to think where I can buy new one, searching in internet because here are has only very small fishing shops. Today I just ask about this ring and was surprised, because shop assistent asked me about size of ring, and after I asked about FUJI rings and she gave me FUJI rings, I'm very glad.
Monday, October 17, 2011
Report fishing 17.10.11
I caught nothing, because fish near the seaside very small, they just bite my twisters
this are 2" twisters.The smallest I had 1.5"
and three twisters had only body without tail at all.
this are 2" twisters.The smallest I had 1.5"
and three twisters had only body without tail at all.
Sunday, October 16, 2011
Friday, October 14, 2011
Walleye weights
Today all day I prepared walleye weights, I want to try outlet leder rigs...
I want to try 2 kinds of this rig.
I want to try 2 kinds of this rig.
Wednesday, October 12, 2011
Hand Made Rod Tube
I took a pipe 3", 1m of tarpaulin, 1 zipper 5", 2 plastic botŠµles of Coke, foam rubber...and
I have this
one from Cabela's and second one Hand made
I have this
one from Cabela's and second one Hand made
Tuesday, October 11, 2011
Project OCTOPUS HEAD pt2
After this night I have 3 lead copy of 'octopus head'
I prepare some scirts, paints(I'm using nail lacquer),beads(for eyes) and hooks to rig these heads
Sunday, October 9, 2011
A new weapon in my arsenal
Saturday, October 8, 2011
Friday, October 7, 2011
Subscribe to:
Posts (Atom)